The 5000 Series switches feature a modular fan and power supply design for a high availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure.
- 32 x 100G QSFP28 ports
- Wire-speed, ultra-low latency switching
- Supports Open Network Install Environment (ONIE) for zero-touch installation of network OS
- SDN-enabled with OpenFlow 1.3 support
- Dual AC/DC hot-swappable power supply modules for 1+1 redundancy and load sharing
- Modular n+1 hot-swappable fan design
100G QSFP28 ports |
32 |
USB 2.0 port |
1 |
RJ-45 port |
1 |
RJ-45 Management port |
1 |
Switch Capacity |
6.4 Tbps |
Max. Packet Forwarding Rate |
2,980 Mpps |
Max. Forwarding Rate |
2,980 Mpps (2.980 Bpps) |
Packet Buffer Memory |
16 MB |
MAC Address Table |
40K |
Power Input |
1+1 redundant power supply design Input: 100 to 240 V AC, 50/60 Hz |
Operating Temperature |
0 to 45 ºC (32 to 113 ºF) |
Weight |
8.7 kg (19.2 lbs) |
Operating Humidity |
5% to 95% RH, non-condensing |
Dimensions (W x D x H) |
440 x 406 x 44 mm (17.32 x 16 x 1.73 inch) |
Acoustics |
Max: 71.8 dB Min: 57.2 dB |
Fans |
4 x fans |
Heat Dissipation (Max.) |
1433.04 BTU/hr |
Console Port |
1 x RJ-45 console port |
Switching Capacity |
6.4 Tbps |
OOB Management Port |
1 x 10/100/1000BASE-T RJ-45 port |
Maximum Heat Dissipation |
1,433.04 BTU/hr |
Maximum Power Consumption |
420 W |
MTBF |
206,685 hours |
Part Code
DQS-5000-32Q28
Recently viewed product
You can control fully on this carousel from store admin as describe in above section