
The HPE ProLiant ML10 Server is a single-socket 4U tower server. Delivers excellent value in a large form factor that small businesses require to run a small network environment.
- Dual-Core Processor: Intel Pentium G2130 (3.20 GHz/2-core/3MB/55 W, 1600) Processor
- Integrated 1 x 3MB Level3 Intel smart cache
- Intel C204 series chipset
- HPE Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10)
Dimensions (H x W x D) (with feet) |
14.3 x 6.5 x 15 in (36.39 x 16.5 x 38.1 cm) |
|
Weight (approximate) |
Non-Hot Plug LFF Full Loading Single Package weight |
9.74 kg (21.45 lb) |
Non-Hot Plug LFF Full Loading without Package |
7.80kg (17.18 lb) |
|
Non-Hot Plug LFF light Loading without Package |
5.94kg (13.08 lb) |
|
300W Input Requirements |
Rated Line Voltage |
90 to 140 VAC, |
Rated Input Current |
8A (at 100 VAC) |
|
Rated Input Frequency |
47 to 63 Hz |
|
Rated Input Power |
410W (at 115 VAC), |
|
Power Supply Output |
Rated Steady-State Power |
300 W (at 100 VAC), |
Maximum Peak Power |
320 W (at 100 VAC), |
|
System Inlet Temperature |
Operating |
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. The maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. |
Non-operating |
-30° to 60°C (-22° to 140°F). The maximum rate of change is 20°C/r (36°F/hr) |
|
Relative Humidity |
Operating |
10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. |
Non-operating |
5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. |
|
Altitude |
Operating |
The maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
Non-operating |
The maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
|
Acoustic Noise |
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Level C (idle 5.6 bel/OP 6.0 bel) |
|
Emissions Classification (EMC) |
FCC Rating |
Class B |
Normative Standards |
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 |
|
Part Code
ML10 Gen10
Recently viewed product
You can control fully on this carousel from store admin as describe in above section