
The Impairment load modules have a single-slot form factor and are inserted into a high-density XM2 or XM12 chassis to provide 2 to 12 modules per chassis configuration.
The load modules offer 4x1GE, 4x10GE, or 2x40GE Ethernet interfaces that can emulate 64, 32, or 8 unidirectional network clouds respectively. The high-density 1GE, 10GE, and 40GE Impairment test modules are ideal for emulating real-life network impairments.
The modules can emulate a WAN environment and simulate network characteristics, such as delay, delay variation, and impairments, such as packet loss, duplication, and re-ordering. EIMs support the Impairment feature in IxNetwork and IxLoad applications that provide a quick and easy way to set up impairments, across multiple emulated WAN links.
Using EIM ports, IxNetwork and IxLoad are capable of generating a number of impairments, for example, packet drops, latency, or packet re-ordering, which replicates real-life WAN traversal conditions, whereby packet flows are impaired in different modes when traversing a network. The EIM40G2Q load module is not supported in IxLoad
- High-density 1GE, 10GE, and 40GE load modules
- Realistic, high-scale WAN emulation
- Hardware-based impairment generation
- Integration with traffic generation, protocol emulation, and analysis
- Scale port counts with high port density
- Simulate ultra-high latency: 500ms on each 40GE link, 600ms on each 10GE link, and 6 sec. on each 1GE link at line rate traffic
- Leverage a single hardware chassis for traffic load modules
- Use IxNetwork for integrated traffic generation and impairment
- Quickly configure traffic flows and apply impairment
- Automate tests
- Analyze measurements with StatViewer interface
- Achieve 1GE, 10GE, and 40GE line-rate impairment on all frame sizes (64 to 9180-byte frames) with no packet loss
Slot / Number of Ports |
· 1-slot with 32x10GE/1GE SFP+ ports |
Physical Interfaces |
· 32-ports of SFP+ |
Supported Port Speeds |
· 10GESFP+ port: SFP+ 10GE passive, copper Direct Attach Cable (DAC) media · 10GE/1GE-capable fiber media · 100M/port: SFP 100M-capable fiber media |
CPU and Memory |
· Multicore processor with 2GB of CPU memory per port pair |
Part Code
944-1081
Recently viewed product
You can control fully on this carousel from store admin as describe in above section