Novus, Novus-M, and Novus-R are Ixia’s next-generation architecture and Ethernet test solutions that satisfy the test needs of both high-density, multi-rate switch/router makers and the organizations implementing the network equipment. Supporting 8-ports of native QSFP28 100GE, 16-ports of 50GE, 8-ports of 40GE, up to 32-ports of 25GE or 10GE per load module, Novus load modules enable interoperability and functional testing, as well as high-port-count performance testing.
Complex multi-rate Ethernet and networking test requirements have emerged for validating 100GE, 50GE, 40GE, 25GE, and 10GE on the same physical port. Novus native QSFP28 100GE interfaces, along with 50GE, 40GE, 25GE, and 10GE speed and fan-out cable support, address these requirements with a more efficient and flexible set of 100/50/40/25/10GE test use cases.
- Enable affordable, high-density, native QSFP28 100/50/40/25/10GE testing
- Validate 100GE, 50GE, 40GE, 25GE, and 10GE over copper, multimode and single-mode fiber media as applicable
- Leverage excellent interoperability, functional, and performance test platform for the new 100GBASE-SR4, 100GBASE-CR4, 50GBASE-CR2, 50GBASE-SR2, 25GBASE-CR, 25GBASE-SR, with auto-negotiation, FEC, and link training
- Generate broad range of traffic and analysis with full L2/3 protocol emulation coverage
|
Physical Interfaces |
8-ports of native QSFP28 Note: NOVUS 100GE4Q28+FAN is an 8-port hardware load module with 4- ports enabled. |
|
Supported Port Speeds |
· 100GE/port: 100GE-capable fiber and passive copper cable media · 2x50GE/port: 50GE-capable passive copper (DAC) for point-point and fan-out cables, and multimode fiber point-to-point AOC media · 40GE/port: 40GE-capable passive copper (DAC) for point-point and fan-out cables, and multimode fiber point-to-point AOC media, and PLR4 optical transceiver · 4x25GE/port: 25GE-capable fiber and passive copper point-point and fan-out cable media · 4x10GE/port: 10GE-capable fiber and passive copper point-point and fan-out cable media |
|
Number of Users |
· Up to 8-users per load module |
|
CPU and Memory |
· Multicore processor with 2GB of CPU memory per port for 100GE and 40GE, 1GB of RAM for each of the 2x50GE fan-outs, and shared across the 4x25GE and 4x10GE fan-outs |
Part Code
Novus QSFP28
You May Be Interested In
You can manage this carousel from admin.You can stop autoplay, increase/decrease aniamtion speed and number of grid to show and products
Recently viewed product
You can control fully on this carousel from store admin as describe in above section
