The high-performance Juniper Networks QFX5110 line of Ethernet switches fit the bill, providing the foundation for dynamic data centers. As a critical enabler for IT transformation, the data center network supports cloud and SDN adoption, network virtualization, integrated/scale-out storage, and the rapid deployment and delivery of mission-critical applications that significantly increase east-west traffic within the data center.
Furthermore, increasing demand for 100GbE spine ports is driving the need for 100GbE uplinks for all server access speeds, including 10GbE and 40GbE. The QFX5110 includes 100GbE uplinks, enabling it to support a diverse set of switching architectures, including fabric, Layer 3, and spine-and-leaf deployments, enabling users to easily adapt as requirements change over time.
- 32Q
- Switch
- L3
- managed
- 32 x 40 Gigabit QSFP+ + 4 x 40 Gigabit / 100 Gigabit QSFP28
- back to front airflow
- rack-mountable
|
Device Type |
Switch - 32 ports - L3 - managed |
|
Enclosure Type |
Front to back airflow rack-mountable 1U |
|
Subtype |
40 Gigabit Ethernet |
|
Ports |
32 x 40 Gigabit QSFP+ |
|
Performance |
Switching capacity: 2.56 Tbps ¦ Switching capacity: 1.44 Bpps ¦ Latency: 550 ns |
|
Capacity |
Virtual interfaces (VLANs): 4093 ¦ LAG groups: 104 ¦ Maximum member ports per LAG: 32 ¦ IPv4 routes (Unicast): 128000 ¦ IPv4 hosts: 208000 ¦ Equal-Cost Multipathing (ECMP) ways: 64 ¦ IPv4 routes (Multicast): 104000 ¦ IPv6 routes (Multicast): 52000 ¦ IPv6 routes (Unicast): 84000 ¦ ARP entries: 48000 ¦ Multiple Spanning Tree Protocol instances: 64 ¦ VLAN Spanning Tree Protocol instances: 253 ¦ QoS hardware queues per port: 12 ¦ VSTP instances: 253 |
|
MAC Address Table Size |
288K entries |
|
Jumbo Frame Support |
9216 bytes |
|
Fibre Channel |
FC-BB-5 |
|
Routing Protocol |
OSPF, RIP, BGP-4, IS-IS, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, IGMPv3, MSDP, static IPv4 routing, ECMP, MPLS, Bidirectional Forwarding Detection (BFD), CIDR |
|
Remote Management Protocol |
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, TFTP, SSH, CLI |
|
Authentication Method |
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
Features |
Flow control, VPN support, BOOTP support, RARP support, trunking, VLAN support, IGMP snooping, store and forward, MAC address filtering, IPv6 support, High Availability, SNTP support, Low-latency queuing (LLQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, tunneling, Data Center Bridging Exchange (DCBX) support, enhanced transmission selection, DHCP snooping, Quality of Service (QoS), DHCP server, Dynamic ARP Inspection (DAI), Redundant trunk group (RTG), Non-Stop Bridging (NSB), Non-Stop Routing (NSR), IPv4 support, DHCP relay, Data Center Bridging (DCB), Management Information Base (MIB), Strict Priority Queuing (SPQ), VLAN Spanning Tree Protocol (VSTP), redundant hot swappable fans, FCoE forwarding, Class of Service (CoS), sFlow v5, cut-through, Uplink Failure Detection (UFD), FCoE Initialization Protocol (FIP), IP source guard, View-based Access Control Model (VACM), 16 MB shared buffer |
|
Compliant Standards |
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, Shaped Deficit Weighted Round-Robin (SDWRR) |
|
Processor |
1 x Intel: 1.8 GHz |
|
RAM |
16 GB |
|
Built-in Devices |
64 GB SSD |
Part Code
| QFX5110-32Q-AFI | QFX5110-32Q-DC-AFI |
| QFX5110-32Q-AFO | QFX5110-32Q-DC-AFO |
You May Be Interested In
You can manage this carousel from admin.You can stop autoplay, increase/decrease aniamtion speed and number of grid to show and products
Recently viewed product
You can control fully on this carousel from store admin as describe in above section
