
Intelligent Gateway and Application Server, 2 Serial Ports, 2 Digital Inputs, Relay Output, USB, 10/100Base-T, 2 Antennas, Industrial Temperature, Universal Power Supply with Regional Adapters, RoHS
- Penta-band UMTS/HSPA+ (global coverage)
- Quad-band GSM/GPRS/EDGE
- Ethernet-to-Cellular Failover/Failback
- Ethernet-to-Cellular Routing
- Serial-to-Cellular Tunneling
- Serial-to-Ethernet Tunneling
- SMS – Shoulder Tap, Relay Control, Event Notification, SMS Tunneling*
- Lantronix Device Server Application Suite
- 1 10/100 Port, 2 Serial Ports, 2 Digital Inputs, 1 Relay Output, 1 USB Port
- Industrial Grade Design
- 5-Year Limited Warranty
Network
-
Cellular
- UMTS/HSPA+ (850/800/900/1900/2100 MHz)
- GSM/GPRS/EDGE (850/900/1800/1900 MHz)
- Transfer Rates – up to 14.4 Mbps (downlink), up to 7.2Mbps (uplink)
- SMS Inbound – Shoulder Tap, Relay Control, Tunneling*
- SMS Outbound – Event Notification, Tunneling*
- 1 Secure SIM Slot
- 2 x Omni-Directional Penta-band Antennas
-
Ethernet
- 10BaseT and 100Base-TX Link (auto sensing – MDIX, full and half duplex support)
- RJ-45 Connector with LEDs (operation and link)
- 1.5 KV Isolation
Serial Interface
- Software selectable RS-232/422/485
- Software selectable RS-485 termination
- Serial data rates from 300 to 921 Kbps
- Characters: 7 or 8 data bits
- Parity: Odd, Even, None
- Stop Bits: 1 or 2
- Modem Control: DTR, DSR/DCD
- Flow Control: XON/XOFF (SW), CTS/RTS (HW)
Serial Connector
- 2 x DB9M (DTE) with 15KV ESD protection per port
USB Interface
- USB Mass Storage Device Support
USB Connector
- 1 x USB Type A Host Connector (USB 2.0)
I/O Interface
-
Input
- Connection: Sensors/Events
- Voltage acceptance: 0 to 30 VDC
- Digital input event: User Configurable
- Optical: 1.5 KV
-
Output
- Software: Turn Relay Output ON and OFF
- Automatic Event Trigger: ON or OFF (possible events include loss of cellular link, loss of Ethernet link, digital input event)
- Relay Output Response: User Configurable
- Support 1A @24 V
I/O Connectors
- 2 x Digital Input, 1 x Relay Output (Terminal Block)
LED Indicators
- Cellular Mode, Signal Strength, Serial RX/TX, USB Connection, System Status, Power, Ethernet Speed, Ethernet Activity
Routing / Gateway
- NAT, Port Forwarding, SPI Firewall
- WAN Failover/Failback
- Multiple Ethernet LAN Hosts
- Multihoming
Protocol Support
- Network Services: SMTP Client, RSS, Telnet Server/Client, SNTP, FTP Server/Client, SFTP Server/Client, TFTP Server, Syslog
- Network Management: SNMP v1/v2c/v3*
- Network Security: HTTPS Server/Client, SSH Server/Clent, SSL Server/Client, TLS, IPSec*
- Network Protocols: ARP, HTTP, UDP/IP, TCP/IP, ICMP, BOOTP, DHCP, Auto IP, DNS
- Discovery Protocols: UPnP
- Industrial Protocols*: Modbus TCP, Modbus RTU, Modbus ASCII
Event Triggers And Actions
- Events: Cellular Link State Change, Ethernet Link State Change, Digital Input State Change
- Actions: SMS, Email, HTTP Post, FTP Put, Relay Output, SNMP Trap
Security
- SSL v3, SSH v2, Client & Server, Supports up to 2048-bit certificates
- Encryption: AES, 3DES, RC4
- Authentication: SHA-1, MDS, Base-64 User Access Lists
Part Code
PXC2102H2-01-S
Recently viewed product
You can control fully on this carousel from store admin as describe in above section