
The PA-220R is a next-generation firewall appliance in a ruggedized form factor, providing rock-solid network security for severe environments, such as utility substations, power plants, manufacturing plants, oil and gas facilities, building management systems, and healthcare networks.
The controlling element of the Palo Alto Networks® PA-220R is the PAN-OS security operating system, which natively classifies all traffic, inclusive of applications, threats, and content, and then ties that traffic to the user, regardless of location or device type.
The application, content, and user – in other words, the elements that run your business – are then used as the basis of your security policies, resulting in an improved security posture and a reduction in incident response time.
- 500 Mbps firewall throughput
- 150 Mbps Threat Prevention throughput
- 100 Mbps IPsec VPN throughput
- 64,000 max sessions
- 4,200 new sessions per second
- 1,000 IPsec VPN tunnels/tunnel interfaces
- 3 virtual routers
- 15 security zones
- 250 max number of policies
Screw-on ground point
|
Use this ground point to connect the firewall to the earth ground (ground cable not included).
|
DC power and ground inputs
|
Use the DC input terminal block to connect DC power to the firewall. The terminal block is included in the accessories kit and is labeled A+, A-, B+, and B-.
The two inputs to the right of the four DC power inputs are ground inputs (use only one) that you can use in place of the screw-on ground point on the firewall.
|
Ethernet ports 1 through 6
|
Six RJ-45 10Mbps/100Mbps/1000Mbps ports for network traffic. You can set the link speed and duplex or choose auto-negotiate for each port. These ports also have built-in surge protection.
|
SFP ports 7 and 8
|
Two SFP (1Gbps) ports for network traffic.
These ports also support 100Base-FX.
|
MGT port
|
Use this Ethernet 10Mbps/100Mbps/1000Mbps port to access the management web interface and perform administrative tasks. The firewall also uses this port for management services, such as retrieving licenses and updating the threat and application signatures.
|
CONSOLE port (RJ-45)
|
Use this port to connect a management computer to the firewall using a 9-pin serial-to-RJ-45 cable and terminal emulation software.
The console connection provides access to firewall boot messages, the Maintenance Recovery Tool (MRT), and the command-line interface (CLI).
|
USB
|
A USB port that accepts a USB flash drive with a bootstrap bundle (PAN-OS configuration).
Bootstrapping speeds up the process of configuring and licensing the firewall to make it operational on the network with or without internet access.
|
CONSOLE port (Micro USB)
|
Use this port to connect a management computer to the firewall using a standard Type-A USB-to-micro USB cable.
The console connection provides access to firewall boot messages, the Maintenance Recovery Tool (MRT), and the command-line interface (CLI).
Refer to the Micro USB Console Port page for more information and to download the Windows driver or learn how to connect from a Mac computer.
|
Part Code
PA-220R
Recently viewed product
You can control fully on this carousel from store admin as describe in above section